Anything in here will be replaced on browsers that support the canvas element

Set of brake shoes "Brembo" with new eccentric (1 axle) Fiat 500 F/L/R/126 1. series

This article is available.
41.20 €
incl. 19% VAT excl. shipping to Germany / Deutschland
Recom. amount per car: 2
Item number: 08005/Brembo

Set of brake shoes:

  • "BREMBO"
  • brake linings with eccentric
  • 1 axle
  • pitch circle 190 mm

Exploded-view drawing with accessories 1

Exploded-view drawing with accessories 2

BRAND QUALITY

BREMBO S.p.A. is an internationally active Italian automotive supplier based in Curno at Brembo and is one of the most internationally renowned manufacturers of braking systems for motor vehicles. As an original equipment manufacturer for numerous car, truck, and motorcycle manufacturers, BREMBO is one of the global market leaders and is considered a pioneer in the field of disc brake technology. In addition to high-performance braking systems for motor vehicles, the company also produces clutches and other components for motorsports.

Keep your brakes and brake linings always in top condition. Therefore replace this safety-related component with the smallest signs of wear. If the free travel of the brake pedal is immoderately long or if one wheel shows essential differences to the others considering the brake force, let the whole brake system check by your mechanic.

The strength of the brake pads must not be less than 1.5 mm.

This product fits the following models:

  • Fiat 500 F
  • Fiat 500 l
  • Fiat 500 R
  • Fiat 126 1.series

Other valuable tips can be found under the heading Maintenance and servicing!

The Brake Pads / Brake Shoes

Brake pads are part of the braking system. The braking system has the task of reducing the speed of the vehicle or bringing it to a stop. The braking system in modern vehicles is one of the most heavily stressed safety systems.

Brake shoes are commonly referred to today as the brake pads for drum brakes, which are pressed from the inside against the drum. Strictly speaking, brake shoes consist of the curved metal carriers of the brake pads and the brake pads that make contact with the brake drum. Usually, the brake pads are glued to the metal carriers, but there are also riveted versions. The brake shoes are located inside the brake drum - arranged opposite each other in pairs. One brake drum is responsible for slowing down one wheel.

When the brake is applied, the brake shoes are pressed outward against the rotating brake drum by one or two wheel brake cylinders. This creates friction, and the vehicle is braked or prevented from rolling. Due to friction - the kinetic energy of the vehicle is converted into heat - the brake pads are "worn off" and become thinner. If the brake shoes were not replaced, their brake pads would eventually be completely worn off, and when braking, the carrier material of the brake shoe would be pressed against the brake drums. Since the carrier material of the brake pads is usually made of metal - just like the brake drums - metal would then rub against metal - which is destructive for the brake drums and also highly dangerous - a total brake failure cannot be ruled out.

Brake shoes should always be renewed axle-wise - always right and left simultaneously, as otherwise, there may be different braking effects on both sides, leading to undesirable (and uncontrollable) effects on the vehicle behavior during braking. Therefore, manufacturers usually only offer brake shoe sets that include two pairs of brake shoes.

Fresh brake pads reach their full braking performance only after a certain break-in period. During this break-in period, the surface of the brake pad adapts to the surface of the brake disc/brake drum. The so-called "friction carbon" forms at the contact surface of the brake pad during this phase - the material at the contact surface with the brake disc or brake drum changes under the influence of friction and heat, improving the braking effect.

Recommendations - Accessories:

Brake shoe return spring
This article is available.
1.40 €*
Recom. amount per car: 8
Brake cleaner Cartechnic, spray, 500 ml
This article is available.
4.30 €*  
(1 Liter = 8.60 €*)
 

Customers who bought this item also bought:

Set of foot mats, black with black rim, 4 pieces
This article is available.
54.90 €*
 
Wheel cylinder, front (22.225 mm)
This article is available.
6.90 €*
Recom. amount per car: 2
Wheel cylinder, rear (19.050 mm)
This article is available.
6.90 €*
Recom. amount per car: 2
Set of brake shoes with new eccentric (1 axle), p.c. 190 mm
This article is available.
19.50 €*
Recom. amount per car: 2
Front badge with grill and wings, aluminum, 3 pieces
This article is available.
169.50 €*
 
Axle boot with bushing & radial shaft seals
This article is available.
6.90 €*
Recom. amount per car: 2
Lid for air injection manifold / air distributor
This article is currently not in stock. The delivery time is unclear. If you add this item to you shopping basket, we will inform you as soon as it is in stock again.
19.80 €*
Recom. amount per car: 2
Hood cable assembly
This article is available.
6.10 €*
 

Legal note:


* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.


Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.