Anything in here will be replaced on browsers that support the canvas element

Tie rod pipe with clamps Fiat 500/126

This article is available.
13.90 €
incl. 19% VAT excl. shipping to Germany / Deutschland
Recom. amount per car: 2
Item number: 05023

Tie rod pipe with clamps:

Exploded-view drawing with accessories

You will find some guidance on our column: "Clutch: Check the clearance ".

This product fits the following models:

  • Fiat 500
  • Fiat 126

Other valuable tips can be found under the heading Maintenance and servicing!

The Tie Rod End

The tie rod end is an important component of the steering knuckle steering system. The tie rod is responsible for transmitting the steering movement to the front wheels. The tie rod end is located at the end of the tie rod and acts as a connecting joint.

There are two different designs for tie rods: split tie rods, mainly used in passenger cars, where each wheel is articulated with its own tie rod. Trucks and tractors use a different design.

A tie rod consists of two tie rod ends (joints or ball joints) located at the ends of the tie rod. The connecting rod is a metal tube that can be equipped with one or two longitudinal threads, the length of which can be adjusted via a clamp retainer.

The tie rod end is part of the tie rod and, together with it, transmits the steering movement from the steering gear to the front wheels. The tie rod is mounted between the steering lever and the pivot point on the steering knuckle. Usually, two tie rods are present per steerable axle, and the steering lever is centrally located between them.

Normally, the lifespan of tie rod ends corresponds to the lifespan of the vehicle. However, excessive stress can lead to material fatigue and wear. If the tie rod ends are no longer in optimal condition, it results in significant play in the steering. If the vehicle cannot be steered properly, the tie rod ends should be replaced, and the vehicle alignment should be adjusted.

Recommendations - Accessories:

Tie rod, left or right, ial. production (13,3 mm)
This article is available.
49.90 €*
Recom. amount per car: 2
Tie rod end hub drawer
This article is available.
141.00 €*
 
Tie rod end, outer/short (11,4 mm)
This article is available.
44.30 €*
Recom. amount per car: 2

Customers who bought this item also bought:

Tie rod, center, ital. production (13,3 mm)
This article is available.
20.50 €*
 
Handbrake release-lever left & right (paired)
This article is available.
18.10 €*
 
Pressure spring for thick shaft (Diameter of 25 mm)
This article is available.
0.90 €*
Recom. amount per car: 2
Rubber boot for sliding piece, for thick shaft (Diam. 25 mm)
This article is available.
1.00 €*
Recom. amount per car: 2
Screw for holder/rear axle shock absorber
This article is available.
1.40 €*
Recom. amount per car: 6
Rear axle adjustment disc  0,5 mm
This article is available.
1.30 €*
Recom. amount per car: 10

Legal note:


* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.


Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.