Wheel-bearing grease (up to 160° Celsius), aging resistant
Wheel-bearing grease (up to 160° Celsius), aging resistant
Manufacturer's information:
Resealable and usable for an extended period. Can also be used in smaller quantities.
Product Information:
High-Temperature Grease M2
Age-resistant wheel and roller bearing grease up to +160°C
Advantages:
- For lubricating heavily loaded sliding, ball, and roller bearings at moderate temperatures and speeds.
- Temperature range -30° to +160°C, with continuous re-lubrication, operating temperatures up to +200°C are possible.
- Shear-stable under changing loads and speeds.
- Long-term lubricant in wet and dry operating conditions.
- Age-resistant.
- Good sealing behavior.
- High load-carrying capacity and resistance due to EP agents.
- Good delivery properties in central lubrication systems.
- Silicone-free.
Properties:
- Excellent resistance to water, saltwater, weak acids, and alkaline solutions.
- Reduces friction forces.
- Very adhesive.
- Highly temperature-resistant.
- Low oil separation.
- Good wear protection.
Applications:
- For roller, ball, and sliding bearings that are thermally and mechanically highly resistant.
- For general lubrication during assembly.
- For lubricating bearings in textile, packaging, office, household machines, in electrical engineering, precision mechanics and optics, paper industry, etc.
Application:
- Clean the lubrication point thoroughly.
- Apply High-Temperature Grease M2 with a spatula or lubricate with a suitable grease gun.
- Avoid excess.
Technical Data:
Soap type: Lithium complex soap grease
Form: Paste
Color: Blue/Smooth
Temperature resistance: -30 to +160°C (short-term +200°C)
Drop point: +230°C
Consistency/NLGI: 200°C
Worked penetration: 265-295
Loss after 100,000 strokes max. 12%
CU corrosion test passed
SKF Emcor test 0-0
SKF Running Test A passed
SKF Running Test B at 120°C passed
SKF Vibration Test V2F passed
SKF Low-Temperature Test at -30°C passed
SKF Wheel bearing test passed
Timken OK-Load: 220 N
VKA Weld load: 4000 - 4200 N
Ford Approval: SAM 1C9111A
Designation: KHLP2R and KTALP2R (DIN 51502)
Safety: Free from lead compounds, sulfates, chlorides, and fluorides
- GefStoffV: not subject to labeling
- GGVE/GGVS/RID/ADR: same
- GGVSee/IMDG Code: same
- The product must not enter the water system.
- Classification as water-polluting substance WGK 2
- Not dangerous goods according to transport regulations!
Videos
Customers who bought this item also bought:
Item number: 20997/SKF
Set of rear wheel bearings, for 2 sides, SKF
Fiat 500/126/600 (not for Multipla)
89.90 €*
Item number: 07005/2
Axle coupling (torsion damper), with socket f.t. saf. plate
Fiat 500 F/L/R/126/600 D 2nd series
39.90 €*
Recom. amount per car: 2
Item number: 04002
Rubber mounting for steering knuckle beam/leaf spring
Fiat 500/126
3.10 €*
Recom. amount per car: 4
Item number: 20005/1
Set of front wheel bearings, for 1 side (Polish version)
Fiat 500 F/L/R/126 until '77 (500 N/D)
18.30 €*
Recom. amount per car: 2
Item number: 07010
Rubber boot for sliding piece, for thick shaft (Diam. 25 mm)
Fiat 500 F/L/R/126/126 BIS/600/850
1.00 €*
Recom. amount per car: 2
Set of rear wheel bearings, for 2 sides, SKF
Fiat 500/126/600 (not for Multipla)
Axle coupling (torsion damper), with socket f.t. saf. plate
Fiat 500 F/L/R/126/600 D 2nd series
Rubber mounting for steering knuckle beam/leaf spring
Fiat 500/126
Set of front wheel bearings, for 1 side (Polish version)
Fiat 500 F/L/R/126 until '77 (500 N/D)
Rubber boot for sliding piece, for thick shaft (Diam. 25 mm)
Fiat 500 F/L/R/126/126 BIS/600/850
Legal note:
* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.
Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.