Anything in here will be replaced on browsers that support the canvas element

Supertherm special paint based on silicone resin, silver

This article is available.
25.40 €
(1 Liter = 63.50 €)
incl. 19% VAT excl. shipping to Germany / Deutschland
Item number: U21085

Supertherm-Spray / special paint based on silicone resin:

  • silver
  • 400 ml
  • Dupli-Color

ATTENTION: Dangerous good !

for the painting of objects which are exposed to high heat like engines. Ideal to paint exhaust pipes. Applicable on metal, cast iron, aluminium. Even suitable as protective lacquer for engines.

Manufacturer's data:

Quality and properties:

  • Quick-drying
  • Resistant to high heat (up to 800°C)
  • Excellent adhesion
  • Very good covering and filling properties
  • Good flow, rough surface
  • Very weather-resistant
  • Scratch-proof
  • Forms a high-grade protective coat, even without stoving
  • Fuel-resistance will be achieved after stoving at 160°C for approx. 30 minutes. Hereby you have to reckon with formation of smoke and unpleasant odour. Care for sufficient ventilation.

Data:

  • Basis of the binder: silicone resin
  • Smell: solvent
  • Efficiency: Depending on consistence and color of the ground: 150 ml are sufficient for approx. 0.3 - 0.4 m² 400 ml are sufficient for approx. 1.0 - 1.2 m²
  • Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 10 minutes Non-sticky: after approx. 15 minutes Dry to touch: after approx. 60 minutes Can be exposed to temperature: after approx. 1 hour The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Storage stability: Aerosols: 10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans, maximum nominal volume 400 ml
  • 100% free of heavy metals

Using instructions:

  • Remove rust, oil and grease from the surface to be painted.
  • Then thoroughly sand resp. sandblast; the surface has to be blank to the bare metal!
  • The ground has to be dry and free from dust and fat.
  • Before use, shake can for at least 2 - 3 minutes.
  • Apply 2 thin coats from a distance of approx. 25 cm. Let dry. Important: the thinner the paint coat, the better the temperature-resistance and the adhesion will be.
  • No primer necessary. The best results will be achieved on bare metal!
  • Do not used on chrome-plated parts!
  • Stoving for approx. 30 minutes at 160 - 200°C is condition for curing and thus for the full resilience of the paint coat (fuel-resistance!). Hereby you have to reckon with formation of smoke and unpleasant odour. Care for sufficient ventilation.
  • Protect the object and the surrounding area from spray mist.
  • Temperature should range between +10°C and +25°C, max. air humidity 60 %.
  • Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

Hazard warning:

  • H222 Extremely flammable aerosol.
  • H229 Pressurized container: may burst if heated.
  • H315 Causes skin irritation.
  • H319 Causes serious eye irritation.
  • H336 May cause drowsiness or dizziness.
  • H411 Toxic to aquatic life with long lasting effects.

Legal note:


* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.


Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.