Anything in here will be replaced on browsers that support the canvas element

Body filler 'Presto Flex', 250 g

This article is available.
8.30 €
(1 kg = 33.20 €)
incl. 19% VAT excl. shipping to Germany / Deutschland
Item number: U21010

Body filler 'Presto Flex', 250 g:

ATTENTION: Dangerous good !

Scope of delievery: Putty 242 g, Hardener 8 g.

Manufacturer's data:

Highly elastic, 2-component polyester fine filler to fill small unevennesses and for the "fine-filling" of pre-treated surfaces. Applicable on metal, wood, concrete. The quick curing allows to work on shortly after. Micro-fine filling components result in a very smooth surface. For universal use on many materials in the entire car, construction, and hobby sector.

Quality and properties:

  • Composition of highly-reactive, unsaturated polyester resin, filled with a new, micro-fine pigment-filler-combination
  • Results in a very smooth surface
  • Ease of working
  • Easy to sand
  • Very good adhesion
  • Free of asbestos and silicone
  • Short curing time allows to work on shortly after
  • Resistant to weak acids and bases, propellants, solvents, water and de-icing salt.

Physical and chemical data:

  • Basis: polyester resin with a pigment-filler-combination
  • Colour: white
  • Smell: styrol
  • Consistence: soft, thixotropic, pasty
  • Pot life / Working time at 20°C: approx. 4 - 5 minutes
  • Working temperature: min. 12°C
  • Drying time (at 20°C, 50% relative air humidity): can be sanded after approx. 30 minutes
  • Flash point: approx. 33°C (resin); not applicable for hardener
  • Density at 20°C: putty 1.7 g/cm³ hardener 1.15 g/cm³
  • Addition of hardener: 2 - 4 % (optimal mixture 2,5 %)
  • Temperature resistance of the cured material: 120°C
  • Storage stability: 24 months if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container. Protect from direct sunlight, frost and humidity.

Using instructions:

  • The object you wish to repair should be de-rusted, clean, dry, fat-free and sanded.
  • Take the requested portion of putty compound out of the can and mix it well with the corresponding quantity of hardener.
  • Apply the mixed material in the desired layer thickness. If necessary sand with wet sand paper (grain400)
  • Clean tools immediately after use, if necessary with a nitro thinner.
  • Do not return mixed material into the can.
  • After approx. 30 minutes the repaired spot can be drilled, sanded, sawed, rasped and painted.
  • Already after one-time sanding with wet sand paper (400) it is possible to apply the paint. presto flex Fine Filler is very elastic and constantly easy to sand.
  • The filling compound can be applied to surfaces with low temperatures (minimum +5°C). The filler itself should have room temperature.
  • Advise: do not apply directly on zinc-plated surfaces; these have to be primed before with a suitable zinc primer!

Hazard warning:

  • H226 Flammable liquid and vapour.
  • H315 Causes skin irritation.
  • H319 Causes serious eye irritation.
  • H361d Suspected of damaging the unborn child.
  • H372 Causes damage to organs ( state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard).

Recommendations - Accessories:

Plastic scraper, highly flexible
This article is available.
6.50 €*
 

Customers who bought this item also bought:

TEROSON Stoneguard underbody compound, light, spray 500 ml
This article is available.
26.70 €*  
(1 Liter = 53.40 €*)
 
Inner sill, right, (2 pieces)
This article is currently not in stock. The delivery time is unclear. If you add this item to you shopping basket, we will inform you as soon as it is in stock again.
116.10 €*
 
Set of drive shaft, packings + sliding pieces incl.,  25 mm
This article is available.
222.90 €*
 
Inner sill, left, 2 pieces
This article is available.
116.10 €*
 
Body sealing material, white, 310 ml
This article is available.
9.40 €*
(1 Liter = 30.32 €*)
 
Sill / fender corner panel, front left
This article is available.
9.20 €*
 
Sill / fender corner panel, front right
This article is available.
9.20 €*
 
Sill panel extended left
This article is available.
114.00 €*
 

Legal note:


* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.


Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.