Brunox rust neutraliser and epoxy primer

Brunox rust neutraliser and epoxy primer, 400 ml:

ATTENTION: Dangerous good !

contains no lead, zinc and chromate. Only patented rust converter and primer with epoxy resins that is also available in a handy spray can. Developed for the industry and mechanics.

Manufacturer's data:

Effect: The rust is neutralized. Brunox forms with iron and rust a metal-organic iron complex. The developing black, somewhat compact and durable protective layer provides a long-term corrosion protection and is, thanks to the enrichment with epoxy resin, simultaneously a primer.

Properties:

• Very good penetrating / penetration capacity
• perfect film formation
• no brush marks
• no edge marks
• no washing
• no sanding
• storable without restrictions
• good compatibility with most commercially available coating systems

Technical data:

• Colour: amber-coloured clear liquid
• Recommended drying layer thickness: at least 40-50 µm
• Consumption: about 60g/m² per coating, 15m²/Liter for one coating
• Dilution: max. 8 % acetone
• Heat resistance 180°C for 10 minutes, permanent max. 80°C
• Dust-dry: after about 1 hour at 20°C and dry air
• Cured: after about 24 hours at 20°C and dry air
• pH value (20°C): 4-4,5
• Gloss level: about 60 %, depending on amount of rust
• Solids content: about 16 %
• Density (20°C): 0,9 g/cm³
• Viscosity (25°C): about 37 centistokes

BRUNOX is a brand established since 1976 by the Swiss company Enviro-Chemie AG. In addition to its patented first rust stopper and primer in a single spray can, Enviro-Chemie AG also markets a corrosion protection range under this name.

Hazard warning:

• H222 Extremely flammable aerosol.
• H229 Pressurized container: may burst if heated.
• H319 Causes serious eye irritation.
• H336 May cause drowsiness or dizziness.