Anything in here will be replaced on browsers that support the canvas element

Clutch/thrust plate Fiat 500 N/D

This article is available.
146.20 €
including VAT on scarp value, incl. 19% VAT excl. shipping to Germany / Deutschland
Item number: 01069

Clutch/thrust plate:

This product fits the following models:

  • Fiat 500 N
  • Fiat 500 D
Scrap part deposit of 240 Euro charged for this article! This amount is refunded when we receive your old scrap part in a complete and clean state and in a condition that allows for overhauling, meaning no breaks or cracks. Please contact us if you have any doubts.

According to Directive R 153 of the German VAT Regulations 2008 [assessment basis for parts exchange deals or sales similar to parts exchange deals], this item is subject to VAT on scrap value, amounting to 19% of the scrap value.

The Clutch

The clutch is the link between the engine and the gearbox. With the help of the clutch, this connection can be disengaged (by pressing the clutch pedal) and re-engaged (by releasing the clutch pedal). This enables starting the vehicle and changing gears.

If the clutch pedal is not pressed, a diaphragm spring presses the clutch plate over the pressure plate against the flywheel within the clutch. Thus, a force-fitted connection is established, and the engine torque can be transmitted to the gearbox. When the clutch pedal is pressed, the pressure plate is lifted against the spring force, separating the connection, and no engine torque is transferred to the gearbox.

As the clutch plate wears over time, the pedal force required to operate the clutch increases. If a clutch is no longer in good condition and slips, this is usually noticeable during a drive in the highest gear under load. The engine revs higher, but the speed does not increase. If gears can only be engaged with difficulty and scraping noises occur, the clutch is not disengaging properly. Sometimes, readjusting the clutch play may be sufficient to remedy these symptoms. If that does not work, usually the diaphragm spring of the release bearing in the clutch is faulty or worn. In this case, the corresponding clutch parts need to be replaced.

Recommendations - Accessories:

Clutch disk, fine pitch (20 teeth)
This article is available.
38.00 €*
 
Clutch disk, coarse pitch (6 teeth)
This article is available.
39.90 €*
 
Clutch release bearing (thrust bearing)
This article is available.
26.00 €*
 

Legal note:


* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.


Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.