Tie rod, left or right, polish production (13,3 mm) Fiat 500 F/L/R/126/126P until 5/87/600 D/600 E
Tie rod:
- left or right
- polish production
- 13,3 mm
This product fits the following models:
- Fiat 500 F
- Fiat 500 L
- Fiat 500 R
- Fiat 126
- Fiat 126P until 5/1987
- Fiat 600 D
- Fiat 600 E
The Tie Rod End
The tie rod end is an important component of the steering knuckle steering system. The tie rod is responsible for transmitting the steering movement to the front wheels. The tie rod end is located at the end of the tie rod and acts as a connecting joint.
There are two different designs for tie rods: split tie rods, mainly used in passenger cars, where each wheel is articulated with its own tie rod. Trucks and tractors use a different design.
A tie rod consists of two tie rod ends (joints or ball joints) located at the ends of the tie rod. The connecting rod is a metal tube that can be equipped with one or two longitudinal threads, the length of which can be adjusted via a clamp retainer.
The tie rod end is part of the tie rod and, together with it, transmits the steering movement from the steering gear to the front wheels. The tie rod is mounted between the steering lever and the pivot point on the steering knuckle. Usually, two tie rods are present per steerable axle, and the steering lever is centrally located between them.
Normally, the lifespan of tie rod ends corresponds to the lifespan of the vehicle. However, excessive stress can lead to material fatigue and wear. If the tie rod ends are no longer in optimal condition, it results in significant play in the steering. If the vehicle cannot be steered properly, the tie rod ends should be replaced, and the vehicle alignment should be adjusted.
Recommendations - Accessories:
Item number: 05012
Nut for tie rod end/screw for steering kuckle/leaf spring
Fiat 500 F/L/R/126/126P/600
0.80 €*
Recom. amount per car: 14
Nut for tie rod end/screw for steering kuckle/leaf spring
Fiat 500 F/L/R/126/126P/600
Customers who bought this item also bought:
Item number: 07008/1
Axle boot with metal bushing and radial shaft seals
Fiat 500 R/126/126 BIS
8.00 €*
Recom. amount per car: 2
Item number: 13024
Aluminum window frame incl. seals / set for one door
Fiat 500
19.80 €*
Recom. amount per car: 2
Item number: 13042
Mounting clamp for window frame
Fiat 500/600/126
0.30 €*
Recom. amount per car: 32
Item number: 07010
Rubber boot for sliding piece, for thick shaft (Diam. 25 mm)
Fiat 500 F/L/R/126/126 BIS/600/850
1.00 €*
Recom. amount per car: 2
Axle boot with metal bushing and radial shaft seals
Fiat 500 R/126/126 BIS
Aluminum window frame incl. seals / set for one door
Fiat 500
Mounting clamp for window frame
Fiat 500/600/126
Rubber boot for sliding piece, for thick shaft (Diam. 25 mm)
Fiat 500 F/L/R/126/126 BIS/600/850
Legal note:
* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.
Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.