Catalytic converter with lambda control system Fiat 500 R/126 (First registration until 31.12.1995)
Catalytic converter:
- with lambda control system
- with general operating licence
- sport exhaust pipe design with single tailspout, inox
- developed in Germany
- EURO 1
For further information, see "Computer controlled catalytic converter for Fiat 500 and Fiat 126".
Included in the scope of delivery:
- 1 Catalytic converter with lambda control system, sport exhaust pipe design with single tailspout, inox
- 2 x Exhaust gasket (03011)
- 1 x Carburetor base gasket (19012)
- 1 x Carburetor spacer seal(heart-shaped)(19011)
- 1 x Lambda probe
- 1 x Control unit/exhaust control modul
- 1 x secondary air valve
- 2 x Air hose 27 cm/50 cm for the secondary air valve
- 1 x Bakelite piece for the carburetor, complete with hose fitting
- 1 x Relay
- 3 x Clamp 13-23 mm (03186)
- 1 x Cable set
- 3 x Cable clip (100 mm) (03187)
- 1 x Grommet (03188)
- 1 x TÜV-acceptance inclusive mounting instruction
High resolution picture: PLEASE CLICK
This product fits the following models:
- Fiat 500 R
- Fiat 126 (First registration until 31.12.1995)
Also as Fiat 500 F Version available!
Important information:
Exhaust systems are welded parts. Due to warpage during manufacturing,
friction may occur in the exhaust pipes after installation - the consequences are cracks or breaks in
exhaust pipes and welds. To avoid this, all exhaust systems for Fiat 500 and Fiat 126 should be annealed
to get tension-free after installation! There is no warranty on cracks or breaks on exhaust pipes or weld seams!
The Catalytic Converter
The purpose of a catalytic converter is to initiate or accelerate a chemical process. A catalytic converter, or more precisely, the chemical substances that initiate catalysis, are not consumed in this process and remain unchanged at the end of the catalysis. The catalytic converter, colloquially referred to as "cat," is used to reduce pollutants in the exhaust gases of internal combustion engines. In automotive technology, the term catalytic converter generally refers to the entire system of catalytic exhaust gas purification, but, upon closer inspection, multiple components such as lambda sensors, EGR valves, and/or particulate filters work together seamlessly.
During the combustion of gasoline in a gasoline engine, harmful exhaust gases such as carbon monoxide, hydrocarbons, and nitrogen oxides are produced. When burning diesel fuel in a diesel engine, additional pollutants include soot particles and sulfur dioxide. In a regulated (three-way) catalytic converter, harmful carbon monoxide is converted to carbon dioxide, hydrocarbons to carbon dioxide and water vapor, and nitrogen oxides to nitrogen.
A catalytic converter consists of a metal housing containing the substrate that triggers the catalysis. This substrate is traversed by many fine channels, increasing the surface area of the substrate. The larger the surface area, the more exhaust gas can be processed. The hot exhaust gases exit the engine, pass through the surface inside the catalytic converter, and are expelled cleansed through the exhaust.
The vehicle's catalytic converter typically employs three precious metals: rhodium, platinum, and palladium. Platinum is responsible for chemical oxidation processes, rhodium for reduction processes, while palladium ensures higher resistance of the sensitive catalytic surfaces to sulfur. Other crucial components for the effective operation of a catalytic converter include high temperatures (500 degrees) and the correct composition of the exhaust mixture. The high temperature is achieved by placing the catalytic converter immediately after the hot combustion chambers, and the exhaust mixture is controlled, among other things, using a lambda sensor, exhaust gas recirculation, and engine control.
Please send me an e-mail as soon as the item is available in stock again
Recommendations - Accessories:
Item number: 03075
Thermo duct tape for exhaust (25mm x 15m), up to 1100°C
diverse
85.00 €*
(1 lfm = 5.67 €*)
Item number: 03006
Exhaust bracket, bottom (talian version)
Fiat 500 R/126/126P
9.90 €*
Recom. amount per car: 2
Item number: 03008
Exhaust bracket, top (italian version)
Fiat 500 R/126/126P
9.90 €*
Recom. amount per car: 2
Item number: U21084
Supertherm special paint based on silicone resin, black
25.40 €*
(1 Liter = 63.50 €*)
Item number: U21085
Supertherm special paint based on silicone resin, silver
25.40 €*
(1 Liter = 63.50 €*)
Thermo duct tape for exhaust (25mm x 15m), up to 1100°C
diverse
Exhaust bracket, bottom (talian version)
Fiat 500 R/126/126P
Exhaust bracket, top (italian version)
Fiat 500 R/126/126P
Supertherm special paint based on silicone resin, black
Supertherm special paint based on silicone resin, silver
Legal note:
* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.
Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.