Set of steering knuckles (1 grease nipple), rebuilt, exchan. Fiat 500 N/D
Set of steering knuckles:
- 1 grease nipple
- rebuilt
- exchange
- in pairs
Please note:
In combination with the outer tie rod ends Art. 05008 or 05008/1 the steering knuckles for the Fiat 500 F/L/R Art. 04001/B can also be used for the Fiat 500 N/D.
ATTENTION: In order to achieve an optimum service life, the steering knuckles should be greased at least every 5,000 km and lubricated before the first use. It is also recommended to lubricate the steering knuckles before winter and before commissioning in spring as condensation can form in the cold season, which may lead to corrosion.
This product fits the following models:
- Fiat 500 N
- Fiat 500 D
According to Directive R 153 of the German VAT Regulations 2008 [assessment basis for parts exchange deals or sales similar to parts exchange deals], this item is subject to VAT on scrap value, amounting to 19% of the scrap value.
Please send me an e-mail as soon as the item is available in stock again
Alternatively you can also use as substitute:
Item number: 04008
Steering knuckle repair kit, italian production
Fiat 500 D/F/L/R until '74/126 1. series
39.90 €*
Steering knuckle repair kit, italian production
Fiat 500 D/F/L/R until '74/126 1. series
Recommendations - Accessories:
Item number: 04023
Screw for steering knuckle, bottom, M10 x 1,25 x 90 mm
Fiat 500/126
2.50 €*
Recom. amount per car: 2
Item number: 04024
Screw for steering knuckle, top, M10 x 1,25 x 80 mm
Fiat 500/126
1.90 €*
Recom. amount per car: 2
Item number: 05012
Nut for tie rod end/screw for steering kuckle/leaf spring
Fiat 500 F/L/R/126/126P/600
0.80 €*
Recom. amount per car: 14
Item number: 04028
Plain washer for axle stub nut (starting disc)
Fiat 500/126 1.series
3.30 €*
Recom. amount per car: 2
Item number: 05014
Tie rod end, outer/short (11,4 mm)
Fiat 500 N/D/600/600D <2/64
44.90 €*
Recom. amount per car: 2
Item number: U21069
Wheel-bearing grease (up to 160° Celsius), aging resistant
8.40 €*
(100 ml = 8.40 €*)
Screw for steering knuckle, bottom, M10 x 1,25 x 90 mm
Fiat 500/126
Screw for steering knuckle, top, M10 x 1,25 x 80 mm
Fiat 500/126
Nut for tie rod end/screw for steering kuckle/leaf spring
Fiat 500 F/L/R/126/126P/600
Plain washer for axle stub nut (starting disc)
Fiat 500/126 1.series
Tie rod end, outer/short (11,4 mm)
Fiat 500 N/D/600/600D <2/64
Wheel-bearing grease (up to 160° Celsius), aging resistant
Legal note:
* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.
Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.