Set of wiper blades, stainless-steel Fiat 126/124/125/127/600T/Lancia/Alfa Romeo
Set of wiper blades, stainless-steel:
This product fits the following models:
- Fiat 126
- Fiat 126 P
- Fiat 124 Spider/Special/Familiare
- Fiat 125 Special/1300/1500/1800
- Fiat 600 Transporter
- Lancia Fulvia Berlina
- Alfa Romea Giulia/GT/GTA/1300 Spider/1600 Spider
- BMW 1500/1600/1800/2000/TI/TI Lux
- Innocenti A409 S-IM3S-J
- Peugeot 204-Cabrio/304-Coupe/GL/GT
- Talbo Simca Ranch/1100GLS/GLS Break/1100GL-LS
Windshield Wiper and Wiper Blade
The windshield wiper is colloquially known as the part of the car that keeps the windshield or rear window clean. The windshield wiper is a component of the windshield cleaning system, which consists of the wiper motor, the wiper arm, and the wiper blade. While the wiper motor and wiper arm typically last the entire lifespan of a car, the wiper blade is subject to constant wear and must be replaced regularly, similar to a filter - oil filter, air filter, cabin filter, fuel filter.
Under the front hood is the wiper motor, which sets the wiper arms in motion through a linkage. The joint of the wiper blade is clipped to the wiper arms. The most important part of the wiper blade is the wiper rubber made of synthetic rubber. The wiper blade is designed to press the wiper rubber as evenly as possible onto the front windshield. To achieve this, a metal strip is often integrated into a wiper blade.
In a new wiper blade, the edge that rests on the windshield is slightly inwardly curved, creating two fine rubber edges. As the wiper rubber performs its task, this double edge of the wiper rubber is slowly but surely worn down by friction, dirt, water, and snow, becoming rounded, damaged, and frayed, resulting in cracks in the rubber.
When the edges on the wiper rubber of the windshield wiper are worn out, streaks and smears occur when wiping on the windshield. This restricts clear visibility, especially in wet and dark conditions, as lights reflect in these residues on the windshield. Often, a worn-out windshield wiper can also be heard - it squeaks and rattles during wiping. It's time to renew the windshield wiper or its wiper blade. Good windshield wipers and thus clear visibility are vital in bad weather.
The wiper blade of a windshield wiper can be easily replaced. The windshield wiper is attached to the wiper arm with a plastic clip. This clip is opened, and the old windshield wiper is pulled off. New clips are supplied by manufacturers with the new wiper rubbers. The matching plastic piece is clipped onto the wiper rubber, then attached to the wiper arm - and done. The assembly is straightforward.
Recommendations - Accessories:
Customers who bought this item also bought:
Item number: 18011
Set of wiper-blades, stainless steel (narrow)
Fiat 500/600/850/1100 1960-65
24.20 €*
Item number: C08031
Installation kit for brake shoes with return spring
Fiat 126 since 4/82
10.20 €*
Recom. amount per car: 2
Item number: 09007
Rubber bolt for floor mats/trunk gasket
Fiat 500/126/600/850/124
0.50 €*
Recom. amount per car: 22
Item number: C17002
Headlight H4
Fiat 126/127/128-CoupéS-CL-Spezial/Yugo
34.50 €*
Recom. amount per car: 2
Item number: C08002
Set of brake shoes with eccentric, pitch circle 98 mm
Fiat 126P/126 BIS
18.40 €*
Recom. amount per car: 2
Set of wiper-blades, stainless steel (narrow)
Fiat 500/600/850/1100 1960-65
Installation kit for brake shoes with return spring
Fiat 126 since 4/82
Rubber bolt for floor mats/trunk gasket
Fiat 500/126/600/850/124
Headlight H4
Fiat 126/127/128-CoupéS-CL-Spezial/Yugo
Set of brake shoes with eccentric, pitch circle 98 mm
Fiat 126P/126 BIS
Legal note:
* Our offer is addressed to end consumers. So all prices are including value added tax and additionally freight costs.
Drawings could be alike. We can assume no liability to product informations. Pictured related equipment is not contained in the scope of delivery. Logos, descriptions and brands are property of the relative producer. Changes, mistakes and prior sale are subjected.